| Items |
 H-44443W FIP Union x FIP |
H-44444 FIP Union x FIP |
H-44444W FIP Union x FIP |
 H-54443W FIP Union x SWT |
H-54444W FIP Union x SWT |
|||||
| Industry Standards/Certifications | NSF/ANSI 61, NSF/ANSI 372 | |||||||||
| Type | Isolator | |||||||||
| Valve Size | 3/4 | 1 | 1 | 3/4 | 1 | |||||
| Connection Type | FIP Union x FIP | FIP Union x FIP | FIP Union x FIP | FIP Union x SWT | FIP Union x SWT | |||||
| Maximum Operating Pressure Note | 500 psi | |||||||||
| Body Material | Brass | |||||||||
| Seat Material | PTFE | |||||||||
| Ball Material | Brass HCP | |||||||||
| Seal Material | PTFE | |||||||||
| Handle Nut Material | Stainless Steel | |||||||||
| Wing Style "T" Handle Material | Steel CP | |||||||||
| Handle Jacket Material | Vinyl | |||||||||
| Packing Gland Material | Brass | |||||||||
| Stem Seal Material | Brass | |||||||||
| End Cap Material | Brass | |||||||||
| Union Nut Material | Brass | |||||||||
| Retaining Ring Material | Stainless Steel | |||||||||
| Union Fitting Material | Brass | |||||||||
| Washer Material | EPDM | |||||||||
| Drain Valve Handle Material | Enamel Coated Aluminum | |||||||||
| Drain Valve Handle Screw Material | Brass | |||||||||
| Cap & Strap Material | Brass w/ EPDM Washer & Strap | |||||||||
| O-Ring Material | EPDM | |||||||||
| Press O-Ring Material | EPDM | |||||||||
| Grip Ring Retainer Material | Plastic | |||||||||
| Grip Ring Material | Stainless Steel | |||||||||
| Release Ring Retainer Material | Plastic | |||||||||
| Release Ring Material | Plastic | |||||||||
| Inside Diameter (A) | 0.95 in | 1 in | 1 in | 0.88 in | 1 in | |||||
| Length (B) | 4.25 in | 5.00 in | 5.00 in | 4.75 in | 5.13 in | |||||
| Height (C) | 2 in | 2.38 in | 2.38 in | 2 in | 2.38 in | |||||
| Handle Length (D) | 2.54 in | |||||||||
| Width (E) | 3.11 in | |||||||||
| Valve Operator | Wing Lever Handle | |||||||||
| Weight | 3.02 lb | 5.28 lb | 5.27 lb | 3.08 lb | 5.28 lb | |||||
|
|
||||||||||
